聚酯瓦的安装固定
Installation and fixation of polyester tile
①屋面瓦和墙体板均使用防腐防水配件和自攻螺丝固定。
① Roof tiles and wall panels are fixed with anti-corrosion and waterproof fittings and self tapping screws.
②每根檩条、每张瓦需均匀安装两套配件，配件应固定在波峰上，特殊情况时可固定在平面上。
② Each purlin and tile shall be evenly installed with two sets of accessories, which shall be fixed on the wave crest or on the plane under special circumstances.
③瓦的纵向边缘处，每个波峰都要固定在檩条上，在风大地区每个波需要加固定配件。
③ At the longitudinal edge of the tile, each wave crest should be fixed on the purlin. In the windy area, each wave needs to be fixed with accessories.
④墙体板安装时，在两张墙体板的搭接处，每两个檩条之间需要两个以上拉铆钉固定。
④ When the wall plate is installed, more than two rivets are required to fix between two purlins at the lap joint of two wall plates.
⑤打自攻螺丝钉时注意松紧适度，不可过紧，以瓦不变形为标准，否则影响屋面平整度。
⑤ When making self tapping screws, pay attention to the moderate tightness, not too tight, with the tile deformation as the standard, otherwise the roof flatness will be affected.
⑥木檩条使用专用木螺丝固定
⑥ The wooden purlin is fixed with special wood screws